Ultrasonic flow detector Velograph II 

for 92 000 rub

- As easy to use as your smartphone

- The most affordable device from the official list

- Screen size - from smartphones to tablets

- Compact - 165g, 100mm×68mm×26mm

- Included in the state register

-free training

Free consultation

- From screen to operator without wires

A flaw detector, which is as easy as a smartphone

Velograph II is an ultrasonic flaw detector with a tablet or a smartphone used as a screen. Main workflows for testing and thickness measurement: metal and polyethylene pipelines, metal and polyethylene welded joints. A serious device that is as easy to use as a smartphone!

 

All settings with one hand - quickly and intuitively. There are no cables between you and the screen. Nothing prevents you from comfortably doing work, no matter where you are. At altitude, under difficult weather conditions, at low temperatures. It charges fast and holds charge twice as long. Think about your job, not your tools!

Order form 150,000 RUB and receive a gift of your choice:

  • additional transducer — 3000 RUB worth .

  • next year muster — 4000 RUB worth.

  • tuning sample — 3700 RUB worth

To order

Always free hands - nothing extra!

  • Single-handed operation. Everything is thought out to the finest detail. Ergonomic arrangement of buttons to allow a single hand control. It is convenient to work at heights - it is attached to the surface with a magnet. Transfer data via Wi-Fi or Bluetooth. Cables are not tangled, the electronic unit is attached to the arm using a special case. In the same hand - the transducer. Your movements are not constrained!

  • Blitz settings. Automatic adjustment of the parameters of the converter on standard samples. The choice from memory of up to 200 operating modes. Saving settings and control protocols - no need to waste time every time. You select the size of the screen. Adjust the brightness depending on the lighting. To understand, you do not need the manual. Not a single extra setting complicating the work! Friendly minimalism!

  • Seconds to a report. A unique feature is the preservation of control protocols in the process of working with the A-scan. After completing the work, you do not need to prepare reports for hours. At the time of control, a file is created, which is passed through the application on the computer and gives a ready report. No more scribbling in a notebook!

  • Accuracy and visibility. You do the work at the highest level. Envelope function - for more accurate maximum signal detection. Never miss the maximum level value. Convenient and informative - dynamic DVG and DAC curves (ARC).

  • "Smartphone-style" software updates. Is it the time to update the software? No need to go to the developer or wait for a week. Truly flexible software - you update the application in a second just by going to Google Play.

  • Unique features. The control coordinates that the device creates contain GPS coordinates and electronic digital signature. They can be used to determine whether a specialist was really at the site. You can check your employees and contractors.

  • Increased cable life. Located on the side: out of the electronic unit on the shoulder and goes to the converter in your hand. Therefore, it does not interfere with the operator at all. This arrangement minimizes and eliminates cable hooks. Does not get dirty, so it does not absorb contact liquid. 

 

Clear and intuitive user interface

Envelope function for accurate maximum
signal determination

Dynamic DVG and DAC (ARC) curves, AWS D1.1

Functions of automatic adjustment of transducer parameters on standard samples

Saving testing protocols along with the A-scan

More details with all the features can be found
in the Velograph II manual

Is a flaw detector required for licensing or certification of specialists?

The most affordable flaw detector

  • The most affordable flaw detector out of measuring instruments included in the State Register, suitable for obtaining a license.

  • Minimum delivery time - from 1 days.

  • Automatic creation of testing protocols. When passing the exam, all the parameters are entered on the tablet and the exam results are immediately available. This simplifies the process of passing the exam, making it objective and quick.

  • Student control. The GPS-coordinate and EDS are embedded in the control protocols. They can be used to determine whether the person being certified performed the practical exam.

Are you a non-destructive testing specialist?

It is as easy to use as a smartphone!

  • Wide range of applications: low carbon and low alloy steels, stainless, corrosion resistant steels, titanium, aluminum and alloys, polyethylene. You can work with any materials!

  • Easy setup. Saving settings and testing protocols in the process of testing. You do not need to spend extra time either to debug work or to fill in the reports!

  • Small, low weight - allows you to work at heights and carry the device all day easily, to holding it in your hands.

  • Ideal for field work. Duration of work is increased doubled by the 10 or 20 A/h in the Powerbank included in the package. The design is simple and reliable. Cables do not twist or wear. 

  • Work at low temperatures. For low temperatures - a special protected tablet with both button and touch controls.

Implementing ultrasonic testing at work?

Turnkey solution

  • Turnkey flaw detector package. Just tell us what you need. We'll fine tune the package for your requirements. We'll instruct you how to perform the testing and train your specialists for free.

  • Easy to setup and use. Anyone who is capable of using a smartphone can will be able to use the device. Autosaving of all the settings makes your life easier.

  • Wide range of applications: low carbon and low alloy steels, stainless, corrosion resistant steels, titanium, aluminum and alloys, polyethylene. Everything you need for your work!

Order form 150,000 RUB and receive a gift of your choice:

  • additional transducer — 3000 RUB worth .

  • next year muster — 4000 RUB worth.

  • tuning sample — 3700 RUB worth

To order

What can portable and comfortable Velograph II do?

  • Find discontinuities and homogeneity of the material

  • Determine their coordinates.

  • Test welds

  • Measure wall thickness

  • Find locations of corrosion, cracks, stratification

Velograph II is used for

-quality control of welded joints

- quality control of the base metal
(rolled metal, forgings, castings, etc.)

- product thickness measurement

- location and sizing of corrosion, cracks, disbands, etc.

Application area

- boiler inspection facilities,
heating networks

- gas supply and distribution systems

- lifting equipment

- building metal structures

- defense enterprises equipment

- oil and gas industry equipment

- petrochemical industry equipment

- space and aviation industry equipment

Tested materials

 low carbon
and low alloy steels

stainless,
corrosion-resistant steel

titanium, aluminum and their alloys

polyethylene

Which is the right one for you?

Minimal kit

For whom? For certification centers and laboratories of non-destructive testing, which are already equipped with probes and calibration blocks.

What can you do? Thanks to one probe in the kit - to monitor welded joints from low-alloyed and low-carbon steels in a narrow thickness range. If you have your own probes, you cover the entire range of thicknesses and materials.

Base kit

For whom? Suitable for LNK certification (there is a direct probe for measuring thickness). For already certified laboratories and centers that are already equipped with probes and calibration blocks.

What can you do? Control welded joints and base metal from low alloyed and low carbon steels, measure thickness.

Full kit

For whom? For those who work in the field or in difficult weather conditions. 

What can you do?

  • Control welded joints and base metal from low-alloyed, low-carbon steels in the thickness range from 4 to 40 mm for welded joints and up to 100 mm for basic metal, measure the thickness.

  • To control stainless (austenitic) steels, we include other probes in the package.

  • To control other materials: polyethylene or steel with a thickness of less than 4 mm and pipes with a diameter of less than 57 mm, we manufacture special probes.

Base/Full protected kit

 

For whom? For those who work in the field or in difficult weather conditions.

What can you do? Work at low temperatures, strong winds and high loads.

Kits and Prices

Tablet with charger and Velograph II software installed

Angle transducer 5 MHz 65° Steel

-

-

Contact Transducers 5 MHz

-

-

Calibration block V2/25

-

-

Electronic unit case

-

Muster

Equipment

Minimal

Base

Full

-

-

Electronic unit of the flaw detector

Angle transducer 2,5 MHz 65° Steel

Angle transducer 5 MHz 70° Steel

lemo-lemo 1,2 m double cable

-

lemo-lemo 1,2 m single cable

Dual Element Transducers 5,0 MHz Ø6/2

-

Transportation bag

-

Passport and user manual

Price

92000

92800

119800

* All prices include 20% VAT

** Prices are valid on 30.06.2019 .

 

Parametr

Value

Channels

2

Operating frequency, MHz

1,5 ... 15 МГц

Global gain adjustment range, dB

0 ... 84 dB

TVG dynamic range

84 dB

Ultrasound velocity settings range

1 ... 11000 with step divisible by 1

The measurement range of defect coordinates (the depth of the defect on steel) with an inclined transducer 5 MHz

3 ... 240 mm

Depth range of defects (for steel) with a direct transducer

3 ... 180 mm

Maximum permissible basic error of measuring the depth of defects and thickness (for steel) with a direct transducer

±(0,01t+0.2), where t - measured time interval value

Maximum permissible absolute error of measuring the coordinates of defects for steel with an inclined transducer

±(0,03H+1), (range L and depth H)

Operating temperature range

-20° ... +45°C

Built-in rechargeable battery life

not less than 6 h

Mean time to failure, not less than

18000 h

Dimensions

100 mm х 68 mm х 26 mm

Weight

165 g

Connectivity

Wi-fi, Bluetooth, USB

Functions

ACG, ARC, envelope

Automatic, semi-automatic calibration

Speed ​​of sound, delay in prism, angle of entry

Warranty period

2 years after delivery

 
To order

Ultrasonic flaw detector Velograph II with "in one hand" approach a smartphone/tablet used as a screen.

Ультразвуковой дефектоскоп

Using is as easy as using a smartphone. Always work with comfort!

 

  • Typical control and thickness gauges - everything you need for your business!

  • Settings with one hand - quickly and intuitively                          

  • Automatic saving settings - convenient and easy

  • There are no cables between you and the screen - free movement

  • Suitable for severe weather conditions - there is a protected version

  • Automatic creation of reports - do not waste time on paper work!

 

Velograph II is included in the state register of means of measurement. Certificate SI No. 68124-17

Contacts

Manufacturer
LLC "Constructia"

Adress:

105066 Moscow, Tokmakov Pereulok,14 Building 3, 2nd floor 

E-mail: info@vlg2.ru

           

Phone: +7 (499) 261-19-59

                 

: +7 (925) 088-11-81

Call: +7 (499) 261-19-59
 

Order form 150,000 RUB and receive a gift of your choice:

  • additional transducer — 3000 RUB worth .

  • next year muster — 4000 RUB worth.

  • tuning sample — 3700 RUB worth

To order

© 2018 LLC "Constructia".